| 161.20.0450.891.21.1503 Standard 5 Slewing Ring Bearings | Limiting Speed Rating (r/min):12000; D:62mm; Dynamic Load Rating (kN):20.6; Seals or Shields:Two Metal Shields; Static Load Rating (kN):11.2; Availability:In Stock; Cage Type:Steel; SKU:6305zz-timken; Clearance:Standard; Weight:0.23 KGS; d:25mm; B:17mm; Reference Speed Rating (r/min):17000; |
| 161.20.0710.890.11.1503 Standard 5 Slewing Ring Bearings | Basic static load rating C0:1370 kN; d:530 mm; Basic dynamic load rating C:178 kN; D:590 mm; d1 ≈:585 mm; Reference speed:900 r/min; Minimum load factor A:8.4; Fatigue load limit Pu:21.6 kN; Da max.:556 mm; r1,2 min.:1 mm; ra max.:1 mm; Mass bearing (including seat washer where applicable):12.5 kg; Limiting speed:1200 r/min; D1 ≈:535 mm; H:36 mm; da min.:564 mm; |
| 161.20.0560.890.11.1503 Standard 5 Slewing Ring Bearings | Preload:Medium; Grease Limiting Speed (r/min):8500; B:24mm; Fatigue Load Rating (kN):3.2; Oil Limiting Speed (r/min):14000; Static Load Rating (kN):85; D:150mm; Availability:In Stock; Seals or Shields:Open Type; Dynamic Load Rating (kN):83.2; SKU:7020cd/p4adgb-skf; Cage Type:Plastic; Weight:1.25 KGS; Clearance:Standard; d:100mm; |
| 162.16.0400.890.11.1503 Standard 5 Slewing Ring Bearings | Design (sliding contact surface combination):Steel/steel; d:152.4 mm; Material constant KM:330; C:104.775 mm; Specific dynamic load factor K:100 N/mm²; ra max.:2 mm; da max.:178.3 mm; r1 min.:2 mm; Sealing solution:Triple-lip seals; Da max.:213.5 mm; rb max.:1.1 mm; Da min.:197.5 mm; Mass plain bearing:21.5 kg; b:15 mm; Lubricant:Regular relubricatio; r2 min.:1.1 mm; B:209.55 mm; Specific static load factor K0:300 N/mm²; |
| 162.16.0450.891.21.1503 Standard 5 Slewing Ring Bearings | R2:36.513 mm; Taconite seal:TER 108; J min.:371.475 mm; Stabilizing ring:SR-0-22; N1:25.4 mm; H:287.337 mm; Initial grease fill:382.73 g; S:4.763 mm; h:61.119 mm; Mass pillow block:69.3 kg; P90°:113 kN; Da:240 mm; Housing:SAF 622; PG:1/4 NPT; End plug (suffix Y):EPR 13; Ca:89.789 mm; A1:133.35 mm; P60°:189 kN; P150°:68.1 kN; H1:152.4 mm; |
| A22-129N1 Rotek Slewing Ring Bearings | B3:9 mm; d3:195 mm; Associated spanner:TMFN 23-30; h:6 mm; G:M 150x2; Recommended grub screw tightening torque:35 N·m; B:30 mm; Mass lock nut:2.27 kg; Axial static load carrying capacity:495 kN; Grub (set) screw size:M10; d1:162 mm; b:14 mm; |
| 62.20.0560.001.21.1503 Standard 5 Slewing Ring Bearings | Mass needle roller and cage assembly:0.17 kg; Limiting speed:4000 r/min; U:24 mm; Fatigue load limit Pu:20.4 kN; Fw:120 mm; Ew:127 mm; Reference speed:3400 r/min; Basic static load rating C0:176 kN; Basic dynamic load rating C:56.1 kN; |
| 232.20.0700.503 Type 21/850.2 Standard 5 Slewing Ring Bearings | D:95mm; SKU:6012zz-timken; Cage Type:Steel; Reference Speed Rating (r/min):10000; Weight:0.41 KGS; Limiting Speed Rating (r/min):7200; Clearance:Standard; Availability:In Stock; Dynamic Load Rating (kN):29.5; d:60mm; Seals or Shields:Two Metal Shields; B:18mm; Static Load Rating (kN):22.7; |
| A22-98P1 Rotek Slewing Ring Bearings | Cage Type:Brass; Clearance:Standard; D:580mm; Availability:In Stock; Weight:0.02 KGS; SKU:23168-b-mb-qbl; Seals or Shields:Open Type; B:190mm; d:340mm; |
| 161.20.0710.891.21.1503 Standard 5 Slewing Ring Bearings | J max.:320.675 mm; N1:19.05 mm; End plug (suffix Y):EPR 10; L:361.95 mm; Mass pillow block:29.8 kg; R2:26.988 mm; Pa:9.43 kN; R1:63.5 mm; PosiTrac Plus contact element:2 x B10724-44; PG:1/8 NPT; RG:3/8 NPT; H:209.55 mm; P60°:93 kN; J min.:269.875 mm; A1:98.425 mm; H1:107.95 mm; Labyrinth ring:2 x LOR 43; Max. speed for PosiTrac Plus seal:2150 r/min; A2:160.338 mm; Stabilizing ring:2 x SR-1616; |
| 61.25.1055.500.11.1503 Standard 5 Slewing Ring Bearings | B:23mm; D:120mm; Dynamic Load Rating (kN):57.5; Seals or Shields:Two Rubber Seals; Cage Type:Steel; Availability:In Stock; Weight:1.00 KGS; Clearance:C3; Static Load Rating (kN):40; d:65mm; SKU:6213dduc3-nsk; Grease Limiting Speed (r/min):3600; |
| 162.20.0450.890.11.1503 Standard 5 Slewing Ring Bearings | Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Tolerance housing:H7; d:3 mm; Specific dynamic load factor K:10 N/mm²; D:8 mm; Mass bushing:0.001 kg; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; B:4 mm; Specific static load factor K0:20 N/mm²; |