| A12-125P1 Rotek Slewing Ring Bearings | Availability:In Stock; Cage Type:Plastic; Oil Limiting Speed (r/min):95000; Clearance:Standard; Grease Limiting Speed (r/min):63000; Seals or Shields:Open Type; Weight:0.01 KGS; Preload:Medium; d:12mm; B:5mm; Fatigue Load Rating (kN):0.048; Static Load Rating (kN):1.12; SKU:71801acd/p4dgb-skf; Dynamic Load Rating (kN):1.95; D:21mm; |
| 60.20.0744.575.01.1403 Standard 5 Slewing Ring Bearings | G1:35 mm; Hydraulic nut:HMV 92 E; G2:G 1/4; d:440 mm; d1:420 mm; Mass withdrawal sleeve:31 kg; B1:194 mm; A:9 mm; G:Tr 460x5; B2:205 mm; |
| 60.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | Weight:0.02 KGS; Availability:In Stock; Limiting Speed Rating (r/min):13000; Seals or Shields:Non-Contact Seal; B:13mm; Reference Speed Rating (r/min):--; Cage Type:Steel; Clearance:Standard; Static Load Rating (kN):5.45; D:42mm; SKU:6302vv-nsk; d:15mm; Dynamic Load Rating (kN):11.4; Fatigue Load Rating (kN):--; |
| 3R16-197E2 Rotek Slewing Ring Bearings | d:41.275 mm; ra max.:3.5 mm; d1 ≈:69 mm; Da min.:70 mm; a:25.497 mm; D:88.9 mm; Mass bearing:0.91 kg; B:29.37 mm; r3,4 min.:3.3 mm; Basic static load rating C0:127 kN; Da max.:77.5 mm; db min.:54 mm; rb max.:3.3 mm; Dimension series:HM 803100; Basic dynamic load rating C:116 kN; r1,2 min.:3.5 mm; T:30.162 mm; Db min.:84 mm; Cb min.:7 mm; Reference speed:6000 r/min; |
| 280.30.1000.013 Type 110/1200. Standard 5 Slewing Ring Bearings | Weight:0.02 KGS; Cage Type:Steel; Seals or Shields:Open Type; SKU:1315kj-qbl; Clearance:Standard; Availability:In Stock; B:37mm; d:75mm; D:160mm; |
| 61.20.0710.101.21.1503 Standard 5 Slewing Ring Bearings | Cage Type:Plastic; B:20mm; Weight:0.63 KGS; Availability:In Stock; Seals or Shields:Open Type; d:75mm; Grease Limiting Speed (r/min):12200; Dynamic Load Rating (kN):48; Static Load Rating (kN):45.5; Clearance:Standard; Oil Limiting Speed (r/min):18500; D:115mm; Preload:Medium; SKU:7015ctrqump3-nsk; |
| 232.20.0400.503 Type 21/520.2 Standard 5 Slewing Ring Bearings | D:560mm; Weight:115.00 KGS; Clearance:C3; Fatigue Load Rating (kN):360; SKU:23076cck/c3w33-skf; Limiting Speed Rating (r/min):1200; Reference Speed Rating (r/min):900; Static Load Rating (kN):5000; B:135mm; Dynamic Load Rating (kN):2900; d:380mm; Cage Type:Steel; Seals or Shields:Open Type; Availability:In Stock; |
| 61.25.0764.106.21.1504 Standard 5 Slewing Ring Bearings | l5 ≈:25 mm; d4 ≈:58 mm; Mass rod end:2.2 kg; C1 max.:24 mm; l4 max.:194 mm; Basic static load rating C0:166 kN; h1:145 mm; r1 min.:0.6 mm; d:40 mm; B:28 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:100 kN; w:50 mm; l3 min.:65 mm; l7 min.:50 mm; Material constant KM:330; dk:53 mm; d2 max.:94 mm; G:M 42x3; α:6 °; |
| 3R10-88N2B Rotek Slewing Ring Bearings | P150°:12 kN; Housing:FSAF 611; P180°:14.2 kN; Bearing limiting speed:5600 r/min; Labyrinth ring:2 x LER 23; S:4.763 mm; A1:79.375 mm; Cap bolt recommended tightening torque:149.1 N·m; Stabilizing ring:SR-13-11; H1:82.55 mm; Cap bolt, SAE grade:8; J max.:241.3 mm; da:47.625 mm; L:279.4 mm; Ca:52.807 mm; P120°:13.3 kN; End plug (suffix Y):EPR 5; RG:1/4 NPT; Pa:6.94 kN; H:157.162 mm; |
| 282.30.1000.013 Type 110/1200.2 Standard 5 Slewing Ring Bearings | PG:3/8 NPT; Eye bolt:3/8-16 UNC; Appropriate attachment bolt size G:1 in; J1:85.725 mm; Initial grease fill:850.5 g; Ca:92.939 mm; H:298.45 mm; Mass pillow block:90.3 kg; P60°:193 kN; RG:3/8 NPT; ba:71.438 mm; da:125.412 mm; Housing:SAW 528; R2:30.163 mm; R1:101.6 mm; Cap bolt, SAE grade:8; A2:260.35 mm; J min.:406.4 mm; P90°:116 kN; Stabilizing ring:SR-28-0; |
| A24-107N1 Rotek Slewing Ring Bearings | Accessories:Two Seals & Snap-Rin; B:52.40 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2400 rpm; Basic Static Radial Load Rating Co:193000 N; Oil Speed Rating n2:3400 rpm; Basic Dynamic Radial Load Rating C:151000 N; d:90.000 mm; Grease Speed Rating n1:2400 rpm; D:160.0000 mm; |
| 12.20.1085.000.11.1504 Standard 5 Slewing Ring Bearings | C3:3.4 mm; Mass bearing:0.61 kg; Static axial stiffness, preload class C:280 N/µm; Calculation factor (back-to-back, face-to-face) Y1:0.92; C1:10.9 mm; Ball diameter Dw:9.525 mm; d2:81.6 mm; Calculation factor f:1.09; Fatigue load limit Pu:0.735 kN; Number of balls z:25; da min.:76 mm; Preload class B GB:610 N; Calculation factor (single, tandem) Y2:0.87; Calculation factor (back-to-back, face-to-face) X2:0.67; |