| FAG 534038 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Availability:In Stock; Reference Speed Rating (r/min):13000; Static Load Rating (kN):19.2; D:80mm; d:35mm; Cage Type:Steel; Dynamic Load Rating (kN):33.4; B:21mm; Weight:0.46 KGS; SKU:63072rsc3-timken; Seals or Shields:Two Rubber Seals; Clearance:C3; Limiting Speed Rating (r/min):9300; |
| SKF 350981C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Limiting speed:5100 r/min; S:0.794 mm; da:38.1 mm; A5:29.369 mm; A:58.737 mm; Mass bearing unit:4.54 kg; A6:19.05 mm; Basic dynamic load rating C:96.5 kN; s:25.4 mm; Attachment bolt diameter G:4 x 12.7; L:136.525 mm; N1:14.287 mm; J:104.775 mm; a:3.969 mm; |
| 82997 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Seals or Shields:Open Type; D:480mm; Availability:In Stock; Weight:19.50 KGS; Grease Limiting Speed (r/min):1000; Clearance:Standard; Oil Limiting Speed (r/min):1200; d:380mm; Static Load Rating (kN):375; Dynamic Load Rating (kN):238; SKU:6876m-nsk; B:46mm; Cage Type:Brass; |
| 829788 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da:130 mm; P90°:32.5 kN; Ca:37.008 mm; N1:15.875 mm; Cap bolt recommended tightening torque:81.3 N·m; Taconite seal:TER 36; End plug (suffix Y):EPR 7; A1:79.375 mm; J1:47.625 mm; Cap bolt:2 x 1/2-13 UNC; J max.:244.475 mm; h:31.75 mm; Stabilizing ring:2 x SR-15-0; J min.:219.075 mm; da:60.325 mm; ba:30.163 mm; Max. speed for Taconite seal:1250 r/min; P120°:20 kN; Appropriate attachment bolt size G:0.5 in; |
| NTN CRTD7012 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:110mm; d:60mm; Availability:In Stock; Dynamic Load Rating (kN):169; Reference Speed Rating (r/min):5500; B:28mm; SKU:22212ejw33c3-timken; Clearance:C3; Limiting Speed Rating (r/min):4400; Static Load Rating (kN):174; Weight:1.10 KGS; Seals or Shields:Open Type; Cage Type:Steel; |
| NSK 170TFD2401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Reference Speed Rating (r/min):16000; Weight:0.13 KGS; Clearance:Standard; Cage Type:Plastic; B:15mm; d:25mm; D:52mm; Fatigue Load Rating (kN):0.61; Static Load Rating (kN):9.3; Limiting Speed Rating (r/min):16000; Dynamic Load Rating (kN):14.6; Seals or Shields:Open Type; Availability:In Stock; SKU:7205-b-tvp-uo-fag; |
| 567356 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Clearance:Standard; B:0.787inch; d:50mm; Availability:In Stock; Seals or Shields:Open Type; Weight:0.02 KGS; SKU:32010-qbl; Cage Type:Steel; D:80mm; |
| 829272 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass bushing:0.003 kg; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; D:12 mm; B:6 mm; Tolerance shaft:h8; D1:16 mm; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ max.:0.1; B1:2 mm; Specific static load factor K0:20 N/mm²; Tolerance housing:H7; Permissible sliding velocity v max.:5 m/s; d:8 mm; |
| 545991 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | P90°:49.8 kN; PosiTrac Plus contact element:2 x B10724-53; P120°:31.6 kN; L:330.2 mm; N1:19.05 mm; Stabilizing ring:SR-17-14; A1:88.9 mm; Ca:45.796 mm; ba:35.719 mm; Cap bolt, SAE grade:8; Mass pillow block:24 kg; H1:95.25 mm; RG:3/8 NPT; Appropriate attachment bolt size G:0.625 in; P150°:28.5 kN; End plug (suffix Y):EPR 9; J max.:279.4 mm; R1:53.975 mm; PG:1/8 NPT; Da:150 mm; |
| 509352 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ra max.:1.5 mm; h:6.5 mm; Calculation factor X:0.6; D:120 mm; Basic dynamic load rating C:110 kN; Calculation factor Y2:1.07; Calculation factor Y1:0.66; Basic static load rating C0:112 kN; b:6.5 mm; Da max.:111 mm; Calculation factor Y0:0.58; a:65 mm; da min.:74 mm; d1 ≈:78.5 mm; r0:0.5 mm; Fatigue load limit Pu:4.75 kN; B:23 mm; d:65 mm; Calculation factor A:0.033; r1,2 min.:1.5 mm; |
| SKF 353151 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Static Load Rating (kN):51; D:200mm; Seals or Shields:Open Type; SKU:1319kjc3-nsk; Dynamic Load Rating (kN):129; B:45mm; Availability:In Stock; Clearance:C3; Oil Limiting Speed (r/min):3600; Grease Limiting Speed (r/min):3000; Cage Type:Steel; d:95mm; Weight:0.02 KGS; |
| NTN CRTD5317 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Tolerance housing:H7; Specific static load factor K0:20 N/mm²; B:25 mm; Tolerance shaft:h8; Mass bushing:0.021 kg; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v max.:5 m/s; D:20 mm; Permissible sliding velocity v min.:0.25 m/s; d:15 mm; Coefficient of friction µ min.:0.05; |